roof leakage

• Install a proper Damp Proof Course (DPC), a continuous layer of damp proofing material, by removing a line of bricks close to floor level followed by insertion of plastic sheet along the same line of bricks by replacing the old mortar with waterproof mortar. 
• Cover all the outer walls with vertical DPC from ground to the floor level.
• Apply the most widely used “Pressure Injection of a higher Alkyl Siloxane solution” into the holes of the bricks.
• Place the “Delivery Tubes” of specific designs into the holes of the bricks and transfuse the liquid into the wall under the influence of gravity.

Lay the water proofing membrane, on the top of  the surface of existing floor, which acts as a barrier against dampness.

• Let all the sanitary and the water supply fittings be tight and leak proof.