Squarefeet rate for pop work

- On 05/25/2010 - 175244 View(s) - 113 Comment(s)

The capacity of doing work by an artisan or skilled labour in the form of quantity of work per day is known as the task work or out turn of the labour. The out-turn of work per artisan varies to some extent according to the nature, size, height, situation, location, etc. In well organized work less labour is required. The following may be taken as the approximate quantity of work or out turn or task for an average artisan per day.

Labor Contract vs. material contract

- On 05/23/2014 - 3199 View(s) - Comment(s)

In building construction work, there are many aspects or things to be done by building owner such as arranging drawings, design, sanctions, labor and material etc. In this article there is comparison between through rate contact and labor contract.

These are various designs of POP

- On 05/31/2011 - 979926 View(s) - 134 Comment(s)

Plaster of Paris Ceiling designs are very easy to construct. It is just a matter of creative designs and workmanship. Just look at the variety of POP Ceiling designs so that you can have it in your dream home.

Checklist for Painting Work

- On 09/27/2010 - 48364 View(s) - 7 Comment(s)

Before you start paint work, make sure that the surface is clean of dust, grease and other foreign matter. Decide on superior quality and adequate quantity of paint and mix contents of paint properly to get consistency in paint work. This write up tells some useful tips to get consistency in paint work.

- On 03/26/2012 - 39615 View(s) - 9 Comment(s)

POP expands very slightly on setting.

Brick Work

- On 05/26/2010 - 123824 View(s) - 29 Comment(s)

Brick work is an important part of construction work done with the help of bricks and cement mortar. It is done with different quality of bricks with different ratios of cement mortar according to the requirement.

- On 03/29/2012 - 11985 View(s) - 5 Comment(s)

The plaster should be finished to a true and plumb surface.The plaster should be finished to a proper degree of smoothness.

Which tools are recommended for POP?

- On 03/29/2012 - 11985 View(s) - 5 Comment(s) - On 08/11/2007 - 7575 View(s) - 2 Comment(s)

Finishing trowel: It is used for spreading and leveling plaster on the surface.

What are the characteristics of POP?

- On 03/28/2012 - 18331 View(s) - 2 Comment(s)

Plaster of Paris is easy to spread and level.It is high fire resistant

What is the application of POP?

- On 03/27/2012 - 12015 View(s) - 4 Comment(s)

The supports of the scaffolding should be sound and strong.

- On 02/25/2009 - 8250 View(s) - Comment(s)

The material is mixed with water to a workable consistency. Plaster of Paris is applied to the underside of the laths over the rabbit wire mesh in panels of suitable size and finished to a smooth surface by steel trowels.

- On 03/27/2012 - 16172 View(s) - 1 Comment(s)

Gypsum is a chalk like material.It is a crystalline of Calcium sulphate and water.

- On 03/28/2012 - 17444 View(s) - 6 Comment(s)

In case of single coat plaster, the common thickness is 12 and 15mm.

- On 03/28/2012 - 17444 View(s) - 6 Comment(s) - On 08/11/2007 - 9855 View(s) - Comment(s)

Plaster of Paris: When powdered gypsum is heated to about 1700 C, it looses about three-quarters of its combined water and hemihydrate gypsum is produced.

Surface Preparation and Painting Tips

- On 09/27/2010 - 14756 View(s) - 2 Comment(s)

Paint is any liquid, liquefiable or mastic composition which after application to a substrate in a thin layer is converted to solid form.paint is used to protect ,decorate or add functionality to an object.

Preliminary Works during Ground Work

- On 05/25/2010 - 28050 View(s) - 4 Comment(s)

Entire area should be cleared of all roots, bushes, vegetation etc. for a smooth construction works.

Purchasing Guidelines for Coarse Aggregate

- On 05/26/2010 - 18121 View(s) - 6 Comment(s)

Sub standard material reduces the strength of RCC, Reinforced Cement Concrete, by 10 to 30 %. Use these steps to ensure the procurement of right quality material at right price

- On 05/26/2010 - 18121 View(s) - 6 Comment(s) - On 07/03/2007 - 6287 View(s) - Comment(s)

To minimize the danger of blistering, risk of steam formation etc. Storage temperature of 60 degree C is recommended. This may be increased up to 65 degree C when soft water is used and the storage capacity is limited.

Ceiling designs

- On 03/23/2012 - 674578 View(s) - 66 Comment(s)

Modern Ceiling Design ideas are one of the most beautiful things that can happen to your home design. Here view some pictures of home Ceiling designs.

- On 05/06/2014 - 1638 View(s) - Comment(s)

We all know the importance of brickwork in any construction, So the article here describes the guideline meant for labor for brick work in foundation.