1995
views | 1
answers | Hiee I have seen in granite shops in Bangalore and got inputs that granite from Tamil Nadu/2 or 3 varieties of granite from Karnataka etc will get yellow because they are soft and will absorb water/coffee etc and get stained and will become yellow. Some saying it is formed not my stains but due to high iron content in that part of qurry ,is it so?Some other saying during the rock and cutting if . |
|
|
1921
views | 2
answers | Hi AllI have seen smooth Sadrahalli to rough sadrahalli stones with price range from 65 rs to 52 rs, and planning to use in bathroom/car parking area. But in forum i have seen Sadrahalli absorbs water and it is light weight /absorb stains etc.Is is good to lay sadrahalli in bathroom/carparking/balcony area where water/stains will be there ? Which type of sadrahalli is good rough or smooth ones..... |
3574
views | 1
answers | SirWhat is appropriate rate for cement Concrete Flooring?I am planning to put the mortar( Cement+Sand + aggregate (40mm) ,then above it laying the tiles. i know tile laying is separate rate, but i need to calculate the approximate rate per Sq:ft including material + labour till concrete flooring as i received 12 Rs per Sq;for tile flooring only labourWhat is mortar mixture we should use for cemen. |
5671
views | 2
answers | How do i calcuated how much steel is required for Roof/lintel/beam/pillar/plinth/chajja/slab extension etc. |
13719
views | 6
answers | I Got a suggestion to go for granite in the range for 80Rs/Sqft wo kitchen wardrobe as it is cheaper than concrete one. Just mason need to raise the brick walls at various level and just put these granite slabs on that at every 3 feet etc. This is econonomical as cement concrete would be costly as there is barbending+centering+gangamen+finishing+material charges will add to it.. |
3445
views | 1
answers | What is gap we need to maintain during the barbending stage for Plinth/beam/pillar/roof/chejja?I know it is based on number of column/pillar etc i.e load, but happen to hear from barbenders that they do keep 6inches with ring at 8" inches.is this same for pillar/beam/pillar/roof/chejja etc. |
1911
views | 4
answers | I visited the modular kitchen and they told don't put the kitchen granite until they finish the cabinets. Once finished you could put 20 mm slabs on its top unlike 40 mm we used to put normally. My question1. 20 mm slabs are porous as we put for floors how can it be put for kitchen slabs where water will always be there. There is 40 mm black /green one which is available which we use as counter to. |
1847
views | 1
answers | How much is the distance of Head of suction of a sump motor
which is of 1 HP ? I have been told by texmo dealers that 1HP motor will serve though mine motor point is 25 feet away from the sump .Suguna dealers mentioned it won;t work. could anybody help on this?. |
2134
views | 1
answers | Hi My site is 1ft slope from the road side,and it is dead end
plot and small kaluve (small channel to get rain water from in front of
the house) that coming in front of my house also ends at my plot. If the
rain comes there is no way the water can go ,and it can get into the
compound of my house. I am anyway raising the house by 4 feet from the
road so that water won;t get into the house. |
1981
views | 1
answers | In my rented house the black tint with putty/plastering is breaking out in main hall where water is not there at all . What could be the reason?. |