1848
views | 1
answers | Dishwasher under slab. As seen on amazon almost all dishwashers are 845mm high and 24"x24" WxD . 845 is 33 1/4 " . In rcc slab the slab granite comes to 3 1/2 " at minimum. That means if you want dishwasher under slab, the slab top must be 33 1/4" 1/4 (margin) 3 1/2 " slab with granite = 37" . Even with 2" slab of modular style, the top would come 33 1/2" 2 = 35 1/2" . Can the legs of dis. |
|
|
998
views | 2
answers | For gate post, 13.5x13.5 Brick work with 4.5x4.5 rcc core is better or 6x6 Iron square pipe? the base is 9x9 rcc beam and two 12mm rebars per post are kept. |
1279
views | 0
answers | Is nano white G5 safe for kitchen? Some say the composition is secret so can this be trusted for kitchen slab ?. |
1272
views | 2
answers | I want to build bedroom loft of 2 feet extend from wall. The side walls are 11'2" apart. Left wall is 9" external common wall and right wall is 4.5" partition wall. so slab would be 11'2" x 2'What should be thickness of rcc slab?How much should 4.5 wall be chiselled and how much 9" left wall and how much the 9" wall where this slab would stuck like a cantilever. What would be optimum considering . |
4950
views | 1
answers | One putty mistry told that putty must be done before marble laying on floors as marble grinding splash will stick to the walls and putty will not stick on it later. And putty wont be damaged by marble slurry. Is this true?. |
1043
views | 1
answers | If there is brick found in roof slab, should it be removed and patched with concrete or left as it is.. |
943
views | 2
answers | The roof slab is layed with clean shuttering plates and some places probably due to collar plate the separation line is 3-5mm updown. No plaster or POP is done. Putty is to be used directly over ceiling surface as it came off the plates after grinding with sand paper to clean neru or pure cement layer to increase adhesion. Some putty workers are suggesting to mix POP with putty and fill these to . |
1455
views | 1
answers | What is best method to clean GI Door frames after cement plaster is over. If harsh sandpaper is used, it will rear primer and even zinc coating thus ending protection. using metal object to scrap off cement will also hurt primer and zinc layers. Tried cleaning with regmar number 600, seems to give desired results. What would be best way?. |
1057
views | 0
answers | For porche area flooring, granite stone is slippery and kota stone prone to flaking. Can rough grinding be done on granite for better traction? Is there solution for Kota stone flaking? I have seen severe depth first flaking at joint of four kota stone of 1 inch depth so feeling scary.. |
1288
views | 1
answers | http://www.gharexpert.com/Forum/Forum_Listing.aspxOn above page, I am unable to put a question at following link"Ask a new Question"The form appears and lets me edit, but "Submit button" does nothing....But I am able to ask question via following editbox on right side on same page"Ask your question here!"But this one does not let you add images.I am using FedoraLinux as OS and Firefox as browser.. |