Ground floor frame structure building and first floor brick wall

House plan of 30 feet by 60 feet plot 1800 squre feet built area on 200 yards plot

House plan of 30 feet by 60 feet plot 1800 squre feet built area on 200 yards plot GharExpert.com has a large collection of Architectural Plans. Click on the link above to see the plan and visit Architectural Plan section.

Guideline for Labor for Brick Work in Super Structure

While going for construction, do we know the Guideline meant for Labor for Brick Work in Super Structure? If not then read the article here.

Specification of 'Bricks Walls'

Strong brick walls are a symbol of strong building. Whole construction process somewhere depends on it. So here is a brief detail of what you need to keep in mind while brick wall construction is going on.

Column and Frame Structure Building

Columns are used to support the beam or roofs and transfer the load to the earth. These serve the decorative purpose also

Earthquake Resistant Building Construction

Earthquakes strike without much warning. It may harm badly designed & constructed buildings killing its inhabitants. Tips in this article explain about the earthquake resistant construction & your response if the earth quake does happen.

Make your home earthquake proof

The following points should be kept in mind during construction of building for the protection against ‘Earth Quake’.

Teak wood frame

Teak wood frameTeak wood door and window frame are used in Hotels,Rest House,Temples, Ban glows & other.

Brick Work

Brick work is an important part of construction work done with the help of bricks and cement mortar. It is done with different quality of bricks with different ratios of cement mortar according to the requirement.

Preliminary Works during Ground Work

Entire area should be cleared of all roots, bushes, vegetation etc. for a smooth construction works.

Building Architect vs. Structure Engineer

It is very important to know the difference between architect and structure engineer if you are planning to construct your house. An architect is one who draws the house plans and structural engineer is one who designs the overall internal structure of the house keeping load and bearing capacity in mind.

Which tools recommended for doors, windows and ventilator frames?

The following tools are recommended for door, windows and ventilator frames:

Cement Concrete

In the construction of building work, there is need of various types of building materials which are used during the construction work at different stages. According to structural drawing, cement concrete of different qualities or mix are used in the building at different stages according to the type of building.

Which are various methods for the protection of dampness in buildings?

REPLASTERING: The most common method is to scale the affected damp plaster back to the brickwork and replaster the affected area with a waterproof plaster or cement mixture.

Which Are Various Reasons of Cracks in Buildings?

Cracks can happen due to foundation movements and settlements of building, thermal movements, chemical reactions, elastic deformations and shrinkage etc. in buildings. They can damage plaster of walls, ceilings and destroy the beauty of the structure also. Let’s know their reasons in detail and get preventive measures.

Demarcation/layout Procedure

Baseline is marked on the ground either from centre line of the road or from any permanent building nearby

Cracks at the junctions of Brick Walls and RCC slabs

Handle the cracks in the walls initially because they can destroy smooth finishing of the plaster.

Door and Window Frames

Frames of doors and windows are most important parts of your doors and windows. They are available in different size, height, width and shapes. Frames hold locks and hinges and support door and windows to shut and open easily. Here is what you need to know about different doors and windows frames.

Brick Arches

A brick arch is constructed to cover openings like doors and windows in a building. Arches transmit above loads to the side of an opening. They are mainly provided for architectural appearance. Let’s read to know about a few arches, their designs and precautions.

Average Height of Roof for Big Halls

Maximum height should not be more than 4 meter while minimum height for non A.C. building is 2.75 meter.

Orientation of Building

To get maximum ventilation and natural light in your house, make sure the building is properly oriented. Orientation of building saves energy and provides comfortable living as well. This article tells you about various factors and benefits of building orientation.