More Options

nitin_patel's Network (0)

nitin_patel's Groups (0)

nitin_patel - Executive

Updated on 9/5/2017

I AM WORKING IN PROJECT CELL OF A PRIVATE SECTOR COMPANY,HAVE EXECUTED PORT BASED TANK FARMS,JETTIES,INDUSTRIAL PROJECTS.CURRENTLY BASED AT GURGAON

Current profession: Executive

Gender: Male

Send an email to nitin_patel

Your answer has been saved successfully...!
Email message should not be left blank...!
*Your Message

Pictures uploaded by nitin_patel

Forums contributed by nitin_patel

1857 views	5 answers	Leakages in Apartment A 3 Bed Room apartment on 6th Floor (Total Eight Storied)around 12 years old,is showing seepages and moisture movements onwalls.As a remedy.,the walls of Drawing hall were tiled up to 3 feet so that moisture is contained in side only.The upper part was painted.Now the painted wall has again shoen the signs of flaking of paint dueto moisture movements within the wall.What is the best remedy to hav.

1948 views	1 answers	design of skylight structure for double height hall In an existing house,the hall size is 14ftx20ft and it has double height of 20ft.The roof has an opening of 8ftx8ft which has been covered with aluminium structure and fibre sheet.In summer,the temperature inside the hall is raised too much though light is there.We want to have light at the same time the hall should not get heated up in summer at the same time rain water should not enter the hall..
3581 views	2 answers	Construction of AAC block masonary I request to provide the quantities of Cement and Sand required to complete 1 cum of AAC Block masonary(Block size is 200mmx200mmx600 mm) in 1:6 Cement mortar ratio. Further,some suppliers provide readymix adhesive alongwith the Blocks ,which is made up of cement,sand and a ppolymer(Factory made),which is comparatively better ,Conventional cement mortar OR Factory made adhesive.Which would b.