What are effects on building due to dampness?

;

Protect your home from Dampness

Dampness causes most of the damage to the contents of the building. It often leads to the growth of molds and bacteria and creates an unhealthy environment for those who occupy it. Dampness gradually impairs the affected part of the building so this problem should be attended as soon as possible.

Damp Proofing

Dampness in building or house may cause most of the damage to the components of the building or house. Dampness often leads to the growth of molds, mites and bacteria that creates an unhealthy environment and causes health problems. Damp proofing with the help of chemicals may protect your house.

Which are various types of dampness in the building and their treatment?

Brick and masonry absorb water so they must be sealed off, away from moisture and moisture-bearing substances like soil. If it does not occur, the water will rise in the walls causing dampness.

Which type of plaster is recommended for the protection of dampness?

Cement plaster 1:3 with two coats of hot bitumene when laid @ 1.7 kg per sqr meter or cement plaster 1:3 with bitumen

What care should be taken to protect the dampness from foundations?

The foundation of all structures are embedded into the soil. Bricks being porous or brick masonry below ground level can absorb moisture from adjacent ground.

Which type of DPC recommended for the protection of dampness?

For residential buildings DPC consists of a layer of - 40 mm thick cement concrete 1:2:4 (1 cement: 2 Coarse sand: 4 graded stone aggregate 12.5 mm nominal size ).

Which type of DPC recommended for the protection of dampness?

For residential buildings DPC consists of a layer of-

Which type of chemical is recommended for the protection of dampness ?

The following table expresses the type of coating recommended for the protection of Dampness:

Which types of bricks are recommended to protect the dampness while constructing the building?

The density of masonry bricks used must be greater than 1200 kg/m³.

Which are various methods for the protection of dampness in buildings?

REPLASTERING: The most common method is to scale the affected damp plaster back to the brickwork and replaster the affected area with a waterproof plaster or cement mixture.

Which method should be adopted for flooring for the protection of dampness?

The water proofing membrane is laid out on top of the existing floor surface. It will act as a barrier against dampness.

Which are various brands of chemicals used for the protection of dampness from building ?

The following brands of chemical are used for the protection of dampness from building:

What are the effects due to dampness on the building ?

A damp building is unhealthy to those who occupy it, dampness in building is a concern because it often leads to the growth of molds and bacteria.

Which method should be adopted for the protection of dampness in floor?

The following method should be adopted for the protection of dampness in floor:

Which are various method for the protection of dampness ?

Horizontal DPC :- All the brick walls should be covered with the horizontal DPC at the floor level.

Advantages of Kota Stone Flooring

Kota stone flooring is a subtle blend of grandeur and luxury giving the interior and exterior a gorgeous look.......

Orientation of Building

To get maximum ventilation and natural light in your house, make sure the building is properly oriented. Orientation of building saves energy and provides comfortable living as well. This article tells you about various factors and benefits of building orientation.

Kitchen Pictures

Preview some of the most impressive pictures of kitchen from GharExpert Gallery.

Types of Roofing

A solid roof on building is very important for everybody living in the house. The roof should be constructed in a way that assures you great safety. Here are given details about different types of roofing.

Door and Window Frames

Frames of doors and windows are most important parts of your doors and windows. They are available in different size, height, width and shapes. Frames hold locks and hinges and support door and windows to shut and open easily. Here is what you need to know about different doors and windows frames.