Ratio of Cement and Sand for ‘Plastering’

The ratio of cement and sand for plastering is given below.

6 MM thickness of cement plaster and cement mortar 1:3 or 1:4 is recommended for cement plastering on RCC surfaces, on the RCC walls, Fascia etc. or as directed by the Engineer,

6 MM to 10 MM thickness of cement plaster and cement mortar in 1:3 or 1:4 ratios is recommended for underside of RCC slabs.
12 MM thick cement mortar in 1:4 ratios is recommended on the walls where smooth side exists.
Either 9 or 4.5 MM thick and 15 MM thick cement plaster in 1:4 ratios is recommended on the rough side of the walls.
20 MM thick cement mortar in 1:3 with two coats is recommended in case of vertical Damp Proof Course (DPC).
6 MM thick cement mortar in 1:3 with a coat of white washing is recommended in case of bearing plaster on the walls under the slab.
15 MM thick cement mortar in 1:3 is used with 3 MM thick cement rendering on plaster in case of Dado.

;

Plastering

Plastering not only makes the surfaces smooth but creates a good finishing to the walls, ceiling and roofs also.

Achieve a good quality in ‘Plastering’

Unique 'Plastering' makes a difference and requires a lot of skills which are discussed here.

Cracks at the junctions of Brick Walls and RCC slabs

Handle the cracks in the walls initially because they can destroy smooth finishing of the plaster.

Minimize the defects in ‘Plaster Work’

Create an amusing smoothness in 'Plastering' with some tips and enjoy dazzling surfaces.

In construction work plaster provides protection and decoration. Plaster work is important part of construction, which provides smooth, level and hard surface that can be painted to give good look. Read more about cement plaster checklist in article here.

Guideline for labor in cement plaster

Here in this article we tried to cover the common guideline meant for labor for cement plaster finishing for roof/ceiling and wall.

Which are different types of plastering for construction work?

Types of Plastering in Construction: 1.Sand faced plaster 2.Rough Cast Plaster 3.Pebbled dash plaster

Tools required for Plaster Work

Tools take 'Plastering' to its peak finishing and make it ready for use.

Time schedule for Cement Plastering

Do 'Plastering' only when you know proper time schedule to avoid cracks in future

Recommended thickness of 'Cement Plaster'

Thickness of cement plaster varies and depends on individual taste. You can apply any one from this article.

Specification of ‘Plastering’

Whether you deserve unique skills for 'Plastering' or you need to know them.

Raw Materials and Scaffolding for ‘Plastering’

Raw material and scaffolding are backbone of 'Plastering' and provide necessary support in construction.

Advantages of Kota Stone Flooring

Kota stone flooring is a subtle blend of grandeur and luxury giving the interior and exterior a gorgeous look.......

Orientation of Building

To get maximum ventilation and natural light in your house, make sure the building is properly oriented. Orientation of building saves energy and provides comfortable living as well. This article tells you about various factors and benefits of building orientation.

Kitchen Pictures

Preview some of the most impressive pictures of kitchen from GharExpert Gallery.

Types of Roofing

A solid roof on building is very important for everybody living in the house. The roof should be constructed in a way that assures you great safety. Here are given details about different types of roofing.

Door and Window Frames

Frames of doors and windows are most important parts of your doors and windows. They are available in different size, height, width and shapes. Frames hold locks and hinges and support door and windows to shut and open easily. Here is what you need to know about different doors and windows frames.