What is the checklist of cable lay out in home?

Checklist of cable lay out in home is following.

Check width and depth of the channel, the quality and size of the bricks for mechanical protection.

Check whether cable identification tags are provided or not.

Check the radius of bends.

Check whether proper loops at the ends have been made or not.

Testing of the cable should be done before and after the lay out.

Insulation test should be carried out before and after the lay out of cables.

Cables at the entry of a building should be protected by means of C.I or G.I.

Proper size of cable glands should be used for execution of the cable.

;

Avoid Short Circuit

Avoid daily short circuit and overloading with the use of MCB(miniature circuit breaker), and save your electrical appliances from short circuit.

Do you know what you should know before hiring an electrician? You are responsible for all electrical faults and its repair. You need to hire an electrician for repair of electrical faults. The following checklist should help you when hiring an electrician.

Electric Shock Proof Home

Low quality materials, unqualified electrician and a little carelessness in electric works can cause fatal electric shocks in home. Such accidents are not easy to repair and compensate. So it is essential to take every care while doing electrical fittings during construction of your house. This article gives some tips on electrical works during house construction.

How to prevent electric shock?

Electricity can be deadly if not used with utmost care. When the phase or live wire touches our body, electric current gives shock depending on the intensity of voltage and paralyze muscular functions of the body. To avoid electric shocks during electric works/contact, make sure you have followed all precautions of electric shock mentioned in the following article.

Electric Fitting and Lighting Fixtures

Electric fitting must be safe and ensure proper safety to the occupants of the house. Low quality products or appliances can cause fatal accidents like short circuit fire/smoke, break out of fire in entire house, current-shock to any member etc.

Earthing In Electrical Fitting

In electrical works, earthing or earthed means to connect electrical system to general mass of earth in such a manner as it ensures an immediate discharge of electrical energy without danger at all times.

Electricity Consumption of Various Appliances

Saving electricity not only adds to your money but will help thousands in demand of energy also.It’s duty of every citizen to use appliances in proper way.

Electric Shock and Leakage of Current

Sometimes due to carelessness or ignorance, electric phase (Live) wire comes in touch with human body and the current flows through the body as the body is good conductor of electric current.

Electrical Fitting and Cable Wiring

We all need power to run electrical appliances and different gadgets in our home. For proper distribution of electricity we need to install and maintain the quality wiring by an expert electrician. Following tips will help you understand wiring installation process for your home or office.

Common Mistakes in Electrical Work

Electrical mistakes are common in each and every house that may be dangerous for residents. When you are designing your dream home it may be that you are not aware about the electrical mistakes and its effects. Here are discussed some common electrical problems that can be harmful for residents.

Which are various types of faults in electrical fitting?

These are three types of faults in electrical fitting: .Open Circuit Fault .Short Circuit Fault .Earth fault and Leakage Fault

Which tools are recommended for electrical fitting in home?

The tools for electrical fitting in home: Connector Screw driver (10 cm),Neon Tester,Adjustable Screw Spanner (15cm)

What are various tools used for the installation of Fluorescent tube light?

Fluorescent light tubes come in many shapes and sizes. An increasingly popular one is the compact fluorescent light bulb (CF). A fluorescent lamp produces much useful visible light which require only 1/3 to 1/4 of the input electricity.

Describe the checklist of internal electrical wiring work?

The breadth and thickness of the strips should be checked.Spacing of screws for fixing strips should be checked.

Which are various brands of Electrical Materials?

Brands of electrical materials-Cables-Skytone

Advantages of Kota Stone Flooring

Kota stone flooring is a subtle blend of grandeur and luxury giving the interior and exterior a gorgeous look.......

Orientation of Building

To get maximum ventilation and natural light in your house, make sure the building is properly oriented. Orientation of building saves energy and provides comfortable living as well. This article tells you about various factors and benefits of building orientation.

Kitchen Pictures

Preview some of the most impressive pictures of kitchen from GharExpert Gallery.

Types of Roofing

A solid roof on building is very important for everybody living in the house. The roof should be constructed in a way that assures you great safety. Here are given details about different types of roofing.

Door and Window Frames

Frames of doors and windows are most important parts of your doors and windows. They are available in different size, height, width and shapes. Frames hold locks and hinges and support door and windows to shut and open easily. Here is what you need to know about different doors and windows frames.